by lithium ion intercalation
Si has theoretical capacity of 4200mAh/g
Due to it’s large volume change, pulverization can be occurred.
Silicon has high-capacity but poor cycle stability
Carbon has low-capacity but good cycle stability
So silicon/carbon composites can have higher capacity than single carbon anode,
and better cycle stability than single silicon anode.
The greater
the better
Strong materials are preferred(σ)
Deformation is constrained(E)
The smaller
the better
Light materials are preferred(ρ)
Energy loss is less as possible
Low price
Relatively light MMC
Strong
↓
Final Choice For
Tennis Racket Frame
MMCC Aluminum/graphite fiber ga7-230 metal matrix composite
: Our optimized composite material for the frame of tenn
material)에서도 기준의 적용이 가능하다.
(2) 취성재료의 파괴기준 (Fracture criteria for brittle material)
ⅰ. 최대수직응력기준 (Maximum normal stress criterion)
취성재료는 사전의 항복현상이 나타나지 않고 파단으로 갑자기 파괴되는 특성을 갖는다. 가량 단축 인장응력을 받는 경우, 그 부재가 파손되는 수직
composition. In short, we can say that people’s behavior is important factor when we build the house.
For this reason, we used psychology & behavior test “DISC” made by William Mouston Marston Ph.D. The reason why we choose DISC test is that DISC test divides people into 4 types based on behavior pattern and explains appropriate environment for each type of behavior pattern.
In body, we
IPMC (ionic exchange polymer metal composite)은 전기활성고분자 (electroactive polymer: EAP)의 일종인 이온성 고분자-금속 복합물이다. IPEC는 대표적인 화학적 환원 방법 중 하나로 비교적 쉽게 제조하여 낮은 구동전압에서도 큰 변위를 낼 수 있는 유연성을 지니는 스마트 소재 (soft smart material) 중의 하나이다.
전기
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*Separate Electric furnace and other system like Electronic scale
-Because Electric furnace temperature is very high
so we need to protect other system.
instrument composition
-Electric furnace
Temperature range:
25°C~1500°C
Heat speed :
Maximum 200°C/min
*N
1] bioethanol process
① pretreatment of raw material
To increase the effectiveness of fibrin degradation, pretreatment is necessary. The purpose of pretreatment improves the efficiency of the reaction (hydrolysis) by converting cellulose and its chemical composition and physical form and especially improves the accessibility of the enzyme.
[Figure 2] Pretreatment process
buiskit 01:34:23 checking me out
≫ Materials: Computer, Speaker
3. Activity (30min.)
Each group of students should create conversations (dialogues) following the guidelines in the worksheet. They may also use any idioms that were taught during previous classes. Students should turn in their finished work. Teacher should check them before next class.
4. Assignment (5min)
<그림3: 유압식 만능재료 시험기>은 인장시험에 널리 사용되고 있는 유압식 만능 시험기이며 <그림4: 인장 시험 전후의 시편>는 이것을 이용하여 인장시험한 후 시험전후의 시편 모양(외양)을 비교해 놓은 것이다.
인장시험 후 시편은 단면적이 급격히 줄어드는 네킹(nec-king): 목이 생긴다는 뜻) 현상을